Page 17 of 116

Knives have been used as weapons and tools for thousands of years and are some of the oldest that human society has ever seen. Not all knives were created equal, though.

Originally known as the ‘Balisong,’ the butterfly knife is a Filipino tool that was originally designed for both self-defense and basic utility. Today, though, they’re a popular choice among collectors due to the number of tricks you can perform.

While these may seem impossible at first, they’re entirely doable with enough practice.

Not sure where to start? Don’t worry, we’ve got you covered.

Let’s take a look at everything you need to know about butterfly knife tricks.

Before You Begin…

It’s likely that you’re going to fail tricks numerous times while learning them. Unfortunately, failing with a butterfly knife doesn’t always mean dropping the blade or performing the trick slowly/incorrectly.

It’s relatively easy (and common) for beginners to fold the blade onto their hand or finger. Depending on the sharpness of the blade, this could either be a minor knick or a trip to the emergency room.

So, consider taping the edges of your knife in order to dull the surface while you’re practicing. Alternatively, there are butterfly knives designed with safety in mind that you can use to practice with.

Once you’ve decided which safety precaution is right for you, you’re ready to move onto learning a few basic tricks.

Flip Opening

This is likely the first trick you’ll attempt to learn (as you should since it allows you to open the knife!) Although the end result of a flip opening is holding the knife stationary in your hand, the actual process is often mesmerizing for onlookers.

To begin, hold the closed knife in your dominant hand. Your grip should be loose, and your focus should be on the handle that the back of the blade points to.

Swing the knife open until the other handle touches the back of your hand. It should look like an arcing motion. Then, rotate the handle so that the blade is pointing the same direction as your thumb.

Complete the same motion again (which is similar to casting a fishing line in reverse). Afterward, ‘cast’ the knife forward and it should be fully open. Then, place your thumb around both handles to secure your grip.

This will likely seem confusing at first. But, you can practice each segment of the move in slow motion until you master the basics.

Flip Closing

As the name implies, this is the same concept as flipping the knife open (but in reverse).

Once you’ve mastered the open flip technique, you’ll have an understanding of how to perform this one. It’s important, though, to remember to keep your palms open wide enough to hold both handles when you flip it closed.

Otherwise, you’ll run the risk of injuring your fingers when you begin to perform the trick with a sharp-bladed butterfly knife.

Aerial

This will likely come as a big jump from a conventional flip open. The good news is, though, is that mastering a flip open/close will familiarize you with the mechanics of your knife. This will allow you to manipulate it at a more proficient level.

To begin, hold the opposite handle as you would for a flip open. This is the same handle that would let the blade cut you if it closed on you.

Point the knife straight outward so that the knife could open on its own if you let go due to gravity. This is where the move gets complicated.

Perform an upward motion with your wrist as you drop the second handle (the one that is currently holding the knife closed) and let go of the knife. the leverage and momentum of the swinging handle will cause the knife to rotate in midair.

After a full rotation, you can catch the knife in its open position.

Not only is this move far flashier than a flip open, but it’s also much quicker to perform.

Pinwheel

This knife move is notorious for being portrayed in media. If you’ve ever seen a film where an antagonist brandishes a butterfly knife before combat, you’ve more than likely seen a pinwheel performed.

The backhand variant of the pinwheel, in particular, is rather intimidating, so it makes sense as to why they would write this action into a movie.

For the sake of simplicity, though, we’ll focus on the forehand pinwheel.

Hold the knife as you would if you were beginning to perform an aerial. Let the knife open on its own, but don’t let go.

With an upward flick of the wrist, use the momentum to swing the open handle over to the back of the handle you’re holding. As you do this, point your thumb and index finger outward so that the handles can touch freely.

Now, perform the same motion again. The thing to watch out for here, though, is that the sharp side of the blade will be flipping toward your hand. So, it’s imperative that you ensure your fingers aren’t in the way.

Over time, you’ll be able to perform this movement quickly and repeatedly (which is what makes it appear so intimidating).

Learning Butterfly Knife Tricks Can Seem Intimidating

It may seem hard to get started and learn what you need to know for these tricks, but it doesn’t have to be.

With the above information about butterfly knife tricks in mind, you’ll be well on your way to mastering the basics and moving on toward advanced techniques.

Want to learn more about how we can help? Feel free to get in touch with us today to see what we can do.

Collecting knives is a hobby that millions of people participate in. When your knives see frequent use, though, they’ll begin to dull over time. This is true even for the average kitchen knife.

Eventually, the cutting edge of the blade won’t work like it used to, and you’ll need to sharpen it back to its former glory with a steel or stone knife sharpener. Interestingly enough, not every knife collector knows how to sharpen a knife.

Not sure where to start? Don’t worry, we’ve got you covered.

Let’s take a look at everything you need to know about knife sharpening.

Why Do I Need to Sharpen My Knives?

If you use your knives on a regular basis, it only makes sense to keep them as sharp as possible whether they are straight edges like a chef’s knife or serrated knives. As you may expect, this will allow you to make sure they cut cleanly as they’re intended to.

A sharper knife will allow you to cut more precisely, which gives it far more utility over one that’s dulled over time. Interestingly enough, though, a shaper knife is actually safer than a blunt knife.

A dull knife can still cut, but it requires much more force to do so. A single slip or misstep could easily lead to injury with the amount of force behind the side of blade.

How Can I Tell If A Knife Needs to Be Sharpened?

Fortunately, it’s fairly easy to tell if your blade has become too dull and you need to sharpen your knife. You can test it through three simple methods:

1. It can’t easily slice through a sheet of paper (the paper test)
2. It can cleanly cut through a tomato and smashes it instead
3. It can’t cut through the outer skin of an onion

If it fails any of these tests, it’s likely time for you to look into sharpening your knife’s blade.

How Can I Sharpen My Knife?

Although the process can seem intimidating to complete on your own, it’s a relatively simple process that doesn’t take too much preparation.

In general, there are three ways you can go about this process:

1. Using a whetstone
2. Using an electric sharpener
3. Using a manual sharpener

Let’s explore each one in-depth in order to get a better understanding.

Sharpening With a Whetstone

Before you use a whetstone, you’ll need to figure out the ideal sharpening angle for your blade. You can check your manufacturer’s website for more details, as this may vary from knife to knife.

In general, though, you’ll likely need to sharpen at a 20-degree angle.

To begin, completely submerge the stone in water for approximately 5 to 10 minutes. This should be enough time for any air bubbles to disappear.

Then, place the stone on a flat surface with its coarse side facing the ceiling. Afterward, place the blade on the stone at the correct sharpening angle. Make sure, though, that the blade is facing away from you.

With one hand on the knife’s handle and your other hand on the flat surface of the knife, apply a small amount of pressure and slowly drag the knife across the stone. Be sure to maintain the angle of the blade.

Eventually, a small bit of metal will begin to form over the edge of the entire blade. At this point, repeat the sharpening process on the other side of the knife.

Afterward, flip the whetstone over and fully sharpen both sides again to complete the process.

Sharpening With a Manual Sharpener

Manual sharpeners have two slots you’ll need to focus on: coarse and fine.

Beginning with the coarse slot, slowly pull the entire knife through while exerting an even amount of pressure. Four to six pulls should be enough, but older/damaged blades may require more.

Afterward, pull two or three times through the fine slow in order to finish the process. To test if your blade is sharp enough, use one of the three aforementioned methods (the sheet of paper is often the most convenient).

Sharpening With an Electric Sharpener

This process is highly similar to manual sharpening, but the result is often better for those who are inexperienced.

As with a manual sharpener, you’ll want to pull the blade through the coarse slot four to six times. But, you’ll want to alternate sides with each pull.

Afterward, repeat the same process with the fine grit slot on the electric sharpener.

If the blade isn’t quite as sharp as you’d like, repeat the above steps for half as many pulls in order to finish up.

How Can I Sharpen a Serrated Knife?

It may seem complicated at first to sharpen a knife with so many edges, but the process is almost the same.

It’s not recommended to use a whetstone. But, a manual or electric sharpener are both viable options. Make sure, though, that you only use the ‘fine’ slot on either one to ensure the blade isn’t damaged.

How Often Should I Do It?

In general, you’ll likely only need to sharpen your knives every 6 to 12 months. With heavy use, though, you may find that your blades dull quicker than this.

To keep your knife as sharp as possible between full sharpenings, use the fine slot on a manual or electric sharpener after every use or two.

Understanding How to Sharpen a Knife Can Seem Difficult

But it doesn’t have to be.

With the above information about how to sharpen a knife in mind, you’ll be well on your way to keeping your blades in the best condition possible.

Want to learn more about how we can help? Feel free to get in touch with us today to see what we can do.

Prepping and cooking food at home is the top way to save more money and eat healthier. Yet, this doesn’t mean you have to sacrifice on chef-inspired meals. 

To cook like a culinary master, it’s essential to learn how to use kitchen knives. Certain techniques make it faster, easier, and more efficient to prep food.  

So, ready to learn how to cut, chop, slice, and dice like a chef? Read on to learn more about how to master your knife skills. 

Choose the Right Knife for the Job

It’s key to know the difference between your knife types. A kitchen knife set includes pieces for almost every job in the kitchen. 

A few knife types include bread, steak, paring, and fillet. Boning knives, carving knives, and butcher knives are other styles a chef should own. You should hone your chef knife skills for each of these knife types. 

Yet, there is one knife style that is king when it comes to prep work. A chef’s knife is a multi-functional knife that is used for more than one task in the kitchen. It’s ideal for chopping, slicing, dicing, and mincing foods like meat and vegetables.

Chef Knives

This style of knife has a pointed tip with a longer blade design with a slight curve. The blade’s tip allows a chef to create a rocking technique as they cut. This is ideal for the quick chopping of fresh herbs, garlic, and onions.

The design allows you to keep the tip of the knife touching the cutting board as you chop. Chef’s knives are a bit heavier, which makes it easy to cut and score meat.   

Santoku Japanese Chef Knives

A Santoku knife is ideal for creating fine clean cuts at a fast speed. It lets you master knife techniques for cutting seafood, meat, vegetables, and fruits.

The knife has a flatter and wider blade design and is lighter than a chef’s knife. Its tip is down more towards the end of the blade.

Santoku knives help remove food from the cutting board into your cooking pan. Some of these knives also have depressions on the blade called a “Granton edge.” This works to create less friction to stop food from sticking to the knife as you cut.  

Keep Your Blades Sharp

Any knife guide for better care will tell you to always keep your blades in top condition. Sharp blades make it easier and more efficient when chopping food. A dull blade will lead to a much longer food prep process and can also be unsafe.  

Experts recommend sharpening your knife every few months. You have a few different knife sharpener options to consider for this. You can use a manual knife sharpener tool or an electric knife sharpener.  

Chef’s knives may call for more sharpening sessions. They are often made from softer steel than Santoku knives. 

Proper kitchen cutlery storage options are also important when caring for your knives. You can use a knife block to protect the blades when not in use. This also keeps your kitchen environment safer. 

Magnetic knife strips, knife bags, and sheaths are other options. When cleaning your knives, hand-wash them with mild soap and hot water.  

Hold the Knife in a Comfortable Position

Proper knife cutting techniques also include learning how to hold a knife. This is key for having confidence in the kitchen. 

Be sure to use the right grip when handling your knife. The hold should not be too firm and should fit comfortably in your hand. This allows you to perfect your cutting method and be as quick and safe as possible. 

It’s best to use your index finger and thumb to grip the handle of the blade. Hold the handle up higher with your two fingers touching the base of the blade. The rest of your hand then holds onto the actual knife handle.  

Holding the knife at elbow-height will also give you better control. When holding food to be cut, be careful of the way you keep your hand.

Use a claw-like grip to hold food as you cut with the knife in your other hand. This keeps your fingers out of the way of the knife’s blade.  

Use Consistent Cuts 

Certain knife cuts call for different techniques to prepare food. It always helps to cut round food in half, like onions and potatoes. This gives you a flat surface to work with making it easier and safer to cut. 

A slicing technique involves long thin pieces. Position the knife’s tip on the cutting board at an angle. Then move the food toward the blade as you bring the knife down in a repetitive chopping or sawing motion. 

Chopping is less consistent than other cutting methods. The chunks are made a bit larger and more bite-sized.    

Dicing can be done in large, medium, or small pieces. Yet, the key is to keep the food cuts as consistent in size as possible. Aim for cubes about a quarter-inch in size.  

When mincing, you want to cut the food up as fine as possible. It’s most often used for garlic, ginger, and onion. 

Preparing food julienne means making matchstick-sized cuts. These should be about an eighth of an inch thick. 

For brunoise style, you dice foods that have first been cut julienne-style. The result is small cubes about an eighth of an inch in size.   

The chiffonade technique is most often used for greens and herbs. It cuts them into thin ribbons for a salad or garnishes.  

Perfecting Your Knife Skills With the Right Set of Tools

These knife skills will teach you to be a master chef in no time. The right tools, techniques, and knife care are key when learning to prep food like a professional. 

A quality chef’s knife is one of the main tools to have in your kitchen. Browse the full collection of chef’s knives to find one that suits your cooking style.