The Cutting Edge

The official blog of Knife Depot

Page 27 of 117

Ontario OKC-3S Bayonet – Badass Knife of the Week

November 12, 2018 / / 1 Comment

 

Yesterday was Veterans Day. We thought it would make sense for the Badass Knife of the Week be an actual knife that has been used and still gets used by the military.

Enter the OKC-3S Bayonet.

The Ontario Knife Company OKC-3S Bayonet is a multipurpose fixed blade designed by the United States Marine Corps to be used as a bayonet for M16 rifles.

In the grand scheme of things, the OKC-3S is a relatively recent design that outperformed nearly three dozen other knives submitted for evaluation to the Marine Corps. This multipurpose bayonet was the best in just about every category, which is why it was issued to Marines starting in the early 2000s.

If the design looks familiar, it makes sense. This knife is essentially an amalgamation of all the tried-and-true designs that came before — from the iconic KA-BAR to the M-7 Bayonet.

Continue reading

Knife Rights Appeals NYC Gravity Knife Case to Supreme Court

November 8, 2018 / / 2 Comments

 

Knife Rights has announced it is appealing a case related to the abusive enforcement of New York’s gravity knife ban to the Supreme Court.

Earlier this year, a panel on the United States Court of Appeals for the Second Circuit ruled in favor of New York City and District Attorney Cyrus Vance Jr in the suit brought by Knife Rights. Knife Rights alleges that the city’s policy of treating pretty much any locking folder as an illegal gravity is unjust.

We’ve written about this case for a few years now (read my 2011 article on the initial lawsuit) and have covered all the twists and turns of the story — including efforts by the state legislators to remedy the issue only to be twice thwarted by the governor.

With the appeals court ruling in favor of the city, Knife Rights only has one more option: the Supreme Court. The lobbying organization is submitting a petition for a writ of certiorari, which asks the highest court in the land to hear the appeal.

The Supreme Court is asked to hear roughly 7,000 to 8,000 cases each year but only picks a small handful. So, the odds of the court accepting the case is slim.

Continue reading

Cold Steel Finn Wolf – Badass Knife of the Week

November 5, 2018 / / 0 Comments

 

The puukko is an old and basic fixed blade design that’s been used in the Nordic countries as an everyday knife for hunting and gardening. Cold Steel decided to put its own twist on the classic design with the Finn Wolf.

The Cold Steel Finn Wolf is a folding version of the Finnish puukko knife with a true Scandi grind and modern flourishes, like the Tri-Ad lock and Griv-Ex handle scales.

https://www.instagram.com/p/BmbwMhFgVMp/

The blade itself is 3.5 inches long and is made of Japanese AUS 8A stainless steel, an alloy that’s resistant to rust and easy to sharpen. Without any microbevel, the edge is a true Scandi grind. This makes the blade excellent at woodworking and other outdoor tasks.

Continue reading

Will Victorinox Add Clips to Swiss Army Knives?

November 1, 2018 / / 1 Comment

I’m a huge fan of Victorinox. The almost ancient company has evolved over its decades in existence and always works to improve.

In 2013, the company offered its very first lockback knife aimed at hunters aptly called the Hunter Pro. It wasn’t the first locking Swiss Army Knife because there were a few liner locking folders in the lineup as well, such as the Sentinel. And the Hunter Pro isn’t really a Swiss Army Knife because it only has one blade but it offered an interesting new direction for the company.

Just recently, Victorinox released a new version of the knife called the Hunter Pro M, which could give yet another hint at a new area the company is exploring.

The Hunter Pro M exchanges the walnut wood or polyamide scales for Alox. Aluminum scales were first added to Swiss Army Knives in the 1950s and have remained popular among knife nuts thanks to the material’s durability, looks, and light weight. If I’m not mistaken, this is the largest knife to have Alox scales.

Continue reading

KA-BAR Swabbie – Badass Knife of the Week

October 29, 2018 / / 0 Comments

A few years back, the zombie craze took the knife world by storm. No company upped the zombie killer game better than KA-BAR.

Although the fad has mostly died out, one knife from the KA-BAR Zombie Killer collection remains a fan favorite — the KA-BAR Swabbie.

The Swabbie is a long fixed blade that’s based off the curved short sword known as the scimitar. The blade stretches 12.5 inches and is made of 1095 Cro-Van steel, a popular steel among KA-BAR fixed blades. The scimitar blade shape is surprisingly versatile with a deep slicing belly and a piercing point.

Continue reading

10 Nitpicky Knife Design Annoyances

October 25, 2018 / / 24 Comments

Making a knife is hard. There are so many things to take into consideration — from design to materials.

Criticizing a knife is easy. There are so many little things to nitpick about the design.

While I understand knife designers will likely cringe and complain about this complaint thread from some blogboy, someone’s got to do the dirty work. These aren’t design flaws that completely ruin a knife (well, for normal people anyway), but they can be pretty annoying design decisions or failures.

Here are 10 design nitpicks that I personally find annoying. Let us know your additions in the comments.

Incomplete Sharpening Choil

A choil is that little space between the handle and the edge of the blade. It is typically unsharpened and usually designed to put a finger in to choke up on the blade for more control. However, it can often serve another function as a sharpening choil.

This allows the knife user to sharpen the blade completely with their desired sharpener. For some reason, there are a number of edges that abruptly stop before it gets to the choil. That means there’s an unnecessary unsharpened portion of the edge before getting to the unsharpened portion of the choil.

Nitpicky? Yes. Annoying? Also, yes.

Thumb Stud in Blade Path

The thumb stud is a tried-and-true method for opening a knife. While there have been a number of advances in opening (just check out our popular post on knives with unique opening mechanisms), the thumb stud remains a favorite.

Continue reading

Spyderco Para 3 – Badass Knife of the Week

October 22, 2018 / / 0 Comments

 

The Spyderco Paramilitary 2 is widely hailed as one of the best pocket knives ever made. For a long time, knife nuts demanded a smaller version of the iconic knife. Sal and Eric Glesser finally answered with the Para 3.

The Para 3 uses the same basic design of the PM2 but distills its essence into a smaller package. With a blade at just under 3 inches, the Para 3 uses the same shape and S30V blade as the original PM2.

Continue reading

Spyderco Announces 2019 Discontinued Knives

October 17, 2018 / / 0 Comments

The day of reckoning is here for a number of Spyderco models.

Kristi Hunter of Spyderco has released the annual list of Spyderco knives that did not make the cut. If you’re curious why these specific knives were discontinued, I refer you to my article on why knives are discontinued.

You can find the full list at the end, but here are some of the models we’ll miss the most

Spyderco Sage 2

The discontinuation of the Sage 2 is probably the biggest surprise on this list. Although the knife has been around for a while, the Sage 2 is pretty beloved. What I enjoy about the Sage series is that each comes in a different lock with the 2 using the Reeve Integral Lock. It looks like we’re down to the Sage 1 with a liner lock and the Sage 5 with a Compression Lock.

If you don’t have one yet, you should get one now.

Spyderco ATR 2

This is another shocker simply because it hasn’t been on the market for very long. The ATR 2 marked the return of a much requested knife. The original ATR had an integral Compression lock. However, the new one didn’t have the integral Compression lock and many were saying the knife didn’t live up to expectations.

Continue reading

How Amazon Profits Off Counterfeits

October 16, 2018 / / 8 Comments

Fake knives are a big concern. If you buy from eBay or some less than stellar sites like Alibaba, there’s a fair chance that the knife you get is a fake.

But, if you were to buy a knife from a site like Amazon, it has to be real, right? Not exactly.

We have had a lot of complaints about the way Amazon does business over the years. For example, earlier this year, we wrote about how the massive online store restricts the sale of legal knives to some people. Back in 2013, we also wrote about how sites like Amazon have a leg up selling knives against smaller businesses such as ours thanks to Google.

But, one of our biggest complaints with Amazon has been the fact that they are plagued with counterfeits. Now, a recent story reveals that Amazon not only sells counterfeits frequently but benefits when fakes are sold and does little to rectify the problem.

Amazon ‘Thrives’ from Fakes

An article in the Los Angeles Times reported on fake products, including fake charging cables, and how they’ve affected legitimate businesses.

spyderco counterfeit

Here’s an excerpt from the article:

Not only has the platform avoided any serious backlash for allowing the sale of fake goods, it’s actually thrived from it, say more than two dozen brand owners, e-commerce consultants, attorneys, investigators and public policy experts.

…

Counterfeiters help pressure brands to sell their wares on the site. Companies that avoid Amazon risk letting counterfeiters determine how their goods appear to customers on the most influential e-commerce site — ceding control, for instance, of which pictures are used to promote a product and which colors and sizes are offered.

The spread of cheaper knockoffs can also put pressure on authentic sellers and brands to lower their prices, helping Amazon win more customers.

The company has resisted calls to do more to police its site and address claims by businesses that they are losing millions in lost sales and reputational harm, according to experts.

One of the biggest culprits is the third-party sellers on Amazon. When you buy something off Amazon, a third-party seller will often fulfill the orders, but they may be selling fakes. Even when Amazon itself fulfills the order, the products in their inventory may be fake without them knowing about it.

Continue reading

Schrade SCH111 – Badass Knife of the Week

October 15, 2018 / / 1 Comment

 

The Badass Knife of the Week is a simplified fixed blade with a wicked design that you can carry securely around your neck.

Modeled after the claws of big cats in Southeast Asia, the Schrade SCH111 is as ferocious as it sounds. This karambit-styled knife is designed by Joshua Waggoner and features a 2.97-inch blade made from 9Cr18MoV stainless steel with a hawkbill curve.

The skeletonized handle not only reduces the overall weight of the knife, which comes in at a little more than 3 ounces, but it also offers versatility to the user.

Continue reading

« Older posts Newer posts »

All Categories

More Knife Information

© 2025 The Cutting Edge

Theme by Anders Noren — Up ↑

123